PV Racking Fastener Series and Corrosion Protection Matching

PV Racking Fastener Series and Corrosion Protection Matching

PV Racking Fastener Series and Corrosion Protection Matching

PV racking consists of posts, beams, braces and module clamps; connecting fasteners carry both structural safety and long-term corrosion duty. Series completeness and material/coating matching directly affect installation efficiency and plant life. Specs per project drawings and technical requirements.

Selection must consider rack material, mounting method and environment together—strength alone or price alone leaves hidden risks.

Product Series

Common parts are hex bolts, socket bolts, flange bolts, nuts, flat and spring washers, disc washers and module clamps. Sizes are mainly M8, M10 and M12, with lengths per profile thickness and connection.

Clamps split into mid and end types by frame size; rail connectors, grounding washers and sliders match the system. A complete series reduces mismatch from multiple suppliers.

Material Selection

Carbon steel is the main material—strong and economical, protected by coatings; stainless serves coastal, humid and critical spots with better corrosion resistance at higher cost; aluminum suits lightweight and special structures.

Match rack material to avoid galvanic corrosion from direct dissimilar contact. Steel racks use galvanized parts; aluminum racks with stainless need insulating washers.

Corrosion Schemes

Hot-dip galvanizing is standard—zinc thickness per environment class, commonly higher thickness for longer life. Uniformity and adhesion affect protection; avoid scratches during installation.

Dacromet and zinc-aluminum coatings suit hydrogen-free and higher-corrosion needs with uniform appearance and heat resistance. Stainless relies on its alloy, with passivation as needed. Coastal projects raise the class and shorten inspection cycles.

Strength and Size Matching

Bolt grade follows structural calculation—class 8.8 common, higher at critical nodes. Nuts match bolts; washer hardness matches grade to avoid crushing and preload loss.

Sizes match profile holes—oversized hurts clamping and slip resistance, undersized blocks installation. Thread should protrude 2-3 pitches—too long interferes, too short under-engages.

Inspection and Documents

Batches are checked for dimensions, threads, hardness and coating thickness, with salt spray and adhesion sampling per project. Reports ship with goods, tied to batches for acceptance.

Project files include material certificates, coating reports and certificates of conformity per owner and supervisor requirements. Complete files underpin traceability and acceptance, especially overseas.

Supply and Service

Supply is packed by project list and by installation sequence to save site search time. Labels note spec, quantity and location for storage and issue.

Services include selection advice, sample confirmation and site issue handling. Clear project environment, rack type and installation details prevent spec and coating mismatches.

Installation Notes

Tighten to design torque—over-torque damages coatings or crushes washers. Keep mating faces clean to avoid grit affecting clamp load. Galvanized parts should not directly contact stainless—use insulating washers when needed.

Clear chips from site cutting and drilling to avoid coating scratches. After installation, sample torque and appearance, repairing damaged coating areas.

Contact

Contact: Lizhong Deng

Phone: 13928071304

Tel: +86-756-8586520

Email: sales@jlfastener.com

Add: Room 56-301,Mingzhubeilu 388hao,Xiangzhou Area,Zhuhai City,GuangDong,China